Plexiglass Acrylic Trimmer/Cutter MT05
Equipped with a protective cover, it can avoid injury during working.
The workbench is wide enough to put sheet stably,making cutting more easy and improving working efficiency.
International certification,special black blade,SK2 carbon steel,smooth cutting,no knife collapse.
|Aecfun Acrylic Cutting machine|
|Product Name||Large Format Acrylic Cutter|
|Working Principle||Cutting with a blade||Cutting with a blade|
|Working Pattern||By hand||By hand|
|Product Shiping Specs|
|Warranty||365D(exclude force majeure,aritificial factors)|
1) Application materials: Acrylic sheet, Plexiglass sheet.
2) Available cutting thickness: ≤5mm .
3) Available cutting size: 25″ / 48″.
4) Ruler and blade in one, makes the straight cutting effect better.
5) Smoothly cutting, no rough edge.
6) A good helper for workshop, no dust.
7) The blades can be easily replaced.
1. Q: What’s material can it cut?
A: Acrylic sheet, Plexiglass
2. Q: Can it cut PC?
A: No recommended, PC is not suitable for this machine because of its high tenacity.
3. Q: Is that straight cutting? Can it cut arc?
A: Yes, straight cutting only, no arc cutting.
4. Q: Can it cut off the material one time?
A: No, acrylic sheet is hard to cut off just one time. Usually, grooving first, then break. Details, pls refer to video.
5. Q: What’s the working thickness of acrylic sheet?
A: Thickness ≤5mm
6. Q: How many size? How about the cutting width?
A: Two sizes:MT05-700, cutting width ≤620mm (25″ )；MT05-1300,cutting width≤1220mm(48″ )
7. Q: Can customize 2400mm?
8. Q: How to operate? Any stand holder?
A: Just put on a table, without stand holder.( If need, contact to our sales for custom-made).
9. Q: Why do not have stand holder?
A: Because for cutting hard sheet, it is easier to exert cut putting on the table.
10. Q:Is there anything special?
A: It is specially for acrylic sheet cutting, wide base, straight track, fixed to guides the cutting head, to achieve accurate force and improve cutting performance.
11. Q: What’s special in cutting part?
A: The main part appots aluminium-alloy, firm and durable. Integral structure makes cutting safer.
12. Q: If the balde is blunt, does it need to exchange the whole cutting head?
A: No, only need to exchange the blade.
13. Q: Is the blade special? Difficult to buy?
A: Yes, specail balde, but easy to find in the market.
14. Q: What’s the advantage of this machine MT05, comparing with engraving machine?
A: It is manual cutting machine with high cost performance. It is widely used for small amount, sample, or temporary cutting.
15. Q: Is the cutter easy to install?
A: Do not need to install. It is finished product before shipping, just use it directly.
16. Q: Does the cutter have CE certification?
Manual Plastic/Acrylic cutting machine is especially suitable for cutting acrylic, plexiglass,Plastic, PP, ABS, PET sheet, organic glass. The linear track can guide the knife during work, which can make the cutting edge flat and straight. The protective cover of knife makes cutting safer.