Aecfun  > Product > Acrylic cutter > Plexiglass/Acrylic Cutter MT05

Plexiglass/Acrylic Cutter MT05

manual plastic/acrylic cutter

Manual Plastic/Acrylic cutting machine is especially suitable for cutting acrylic, plexiglass,Plastic, PP, ABS, PET sheet, organic glass. The linear track can guide the knife during work, which can make the cutting edge flat and straight. The protective cover of knife makes cutting safer.

  • Video

  • Product

  • Parameter

  • FAQ

  • Download

plastic cutter/acrylic cutting machine


Manual Acrylic Cutter MT05

Modle:25/48in;Available thickness≤5mm







Protective Cover

Equipped with a protective cover, it can avoid injury during working.


Wide Workbench

The workbench is wide enough to put sheet stably,making cutting more easy and improving working efficiency.


Blade

In order to make the customer more convenient to use in the long term, MT05 uses the blades that are common in the market. You can buy it from us or somewhere else.

Aecfun Acrylic Cutting machine
Product NameLarge Format Acrylic Cutter
Product ModelMT05-700MT05-1300
Working PrincipleCutting with a bladeCutting with a blade
Applicable Width25"(620mm)48"(1220mm)
Applicable Thickness≤5mm≤5mm
Working PatternBy handBy hand
Product Packing
Carton Size850(W)x360(D)x150mm(H) 1450(W)x360(D)x150mm(H)
Packing Quantity1pcs/ctn1pcs/ctn
Net Weight6kg9.2kg
Gross Weight9kg12kg
Product Shiping Specs
20GP608pcs360pcs
40GP            1260pcs735pcs
40HQ1478pcs833pcs
Express ServiceAvailableAvailable
Product Maintenance
CertificationCE Certification
Warranty365D(exclude force majeure,aritificial factors)

1) Application materials: Acrylic sheet, Plexiglass sheet.

2) Available cutting thickness: ≤5mm .

3) Available cutting size: 25" / 48".

4) Ruler and blade in one, makes the straight cutting effect better.

5) Smoothly cutting, no rough edge.

6) A good helper for workshop, no dust.

7) The blades can be easily replaced.

1. Q: What’s material can it cut?

A: Acrylic sheet, Plexiglass

2. Q: Can it cut PC?

A: No recommended, PC is not suitable for this machine because of its high tenacity.

3. Q: Is that straight cutting? Can it cut arc?

A: Yes, straight cutting only, no arc cutting.

4. Q: Can it cut off the material one time?

A: No, acrylic sheet is hard to cut off just one time. Usually, grooving first, then break. Details, pls refer to video.

5. Q: What’s the working thickness of acrylic sheet?

A: Thickness ≤5mm

6. Q: How many size? How about the cutting width?

A: Two sizes:MT05-700, cutting width ≤620mm (25" );MT05-1300,cutting width≤1220mm(48" )

7. Q: Can customize 2400mm?

A: No.

8. Q: How to operate? Any stand holder?

A: Just put on a table, without stand holder.( If need, contact to our sales for custom-made).

9. Q: Why do not have stand holder?

A: Because for cutting hard sheet, it is easier to exert cut putting on the table.

10. Q:Is there anything special?

A: It is specially for acrylic sheet cutting, wide base, straight track, fixed to guides the cutting head, to achieve accurate force and improve cutting performance.

11. Q: What’s special in cutting part?

A: The main part appots aluminium-alloy, firm and durable. Integral structure makes cutting safer.

12. Q: If the balde is blunt, does it need to exchange the whole cutting head?

A: No, only need to exchange the blade.

13.  Q: Is the blade special? Difficult to buy?

A: Yes, specail balde, but easy to find in the market.

14.  Q: What’s the advantage of this machine MT05, comparing with engraving machine? 

A: It is manual cutting machine with high cost performance. It is widely used for small amount, sample, or temporary cutting.

15. Q: Is the cutter easy to install?

A: Do not need to install. It is finished product before shipping, just use it directly.

16. Q: Does the cutter have CE certification?

A: Yes.