Aecfun  > Product > V Groove Cutter > Foam Board V Groove Cutter NC01

Foam Board V Groove Cutter NC01

Foam Sheet cutter NC01 can make V shape grooves on the foam board(KT board). It is suitable for 5mm thickness foam board, groove angel: 90°or 120°.

Mainly for advertising making and model DIY, such as triangular prism box ,cube box, Pillar cladding or lottery box, aircraft model, car model, building model etc...

  • Video

  • Product

  • Parameter

  • FAQ

  • Download

How to Usehttps://www.youtube.com/embed/uHYW7rSjUs8

Installationhttps://www.youtube.com/embed/gMSlzmTuYas


Foam Board Groove Cutter NC01



Two Models

Two options for angle of blade accroding to your requirement.


90 degrees

It can dig  90° grooves for making rectangular box.


120 degrees

It can dig 120° grooves for making triangular prism box for advertising.


Calibration tool

The front and rear projections of the housing can be used to determine if the cut is straight.


Blade

We have a special structure to fix the blade, which makes the cutting more powerful.


Safty Cover

please put on the safty cover after use.  It can not only protect the blade, but also prevent from injury.

Aecfun-Foam Board V Notch Cutter NC01
Product NameFoam Board V Notch Cutter
Product ModelNC01
Cutting Angel90°;120°
Product Packing
Carton SizeCarton:320(W)x250(D)x300mm(H)
Packing Quantity50pcs/ctn
Net Weight5kg
Gross Weight8.5kg
Product Shiping Specs
20GP(General Purpose Container)56700pcs
40GP(General Purpose Container)117600pcs
40HQ(High Cube Container)134400pcs
Express ServiceAvailable
Product Maintenance
CertificationCE Certification
WarrantyN/A

1.Neat and tiny,  easy to operate

2.Fixed and accurate angle, don’t need to adjust the depth.

3.Marked with alignment marks in the starting position and tandem position.

4.Sharpen blade, easy for replacement 

A: 5 mm board.

3. Q: How many angels can it groove?

A: It could groove angle in 90°and 120°, to achieve 90°and 60°angle.

Due to the characteristic of KT board, you could extrussion the V tank to other angle.

4. Q: How many blades does it have?

A: Four, installed already.

5. Is the blade easy to loosen and lost?

A: No, the blade is installed tightly.

6. Q:How to replace the blades?

A: Just loosen the screw, open the moulde and exchange the blade. Please ask sales for video guidance if any questions.

7. Q: Does it need to adjust the depth of blade?

A: No, the blade position and depth is fixed, just put the balde in.

8. Q: It has only one side blade when we receive the cutter, why?

A: You can find other side blade hidden inside, just loosen the screw to change.

9. Q: Is it workable for grooving paper board or acrylic board?

A: No, it is specail designed only for KT board.

10. Q: Is the cover durable? Easy damaged?

A: No, it is made of durable PC material.

11. Q: Is the blade easy for purchase?

A: Blade is 11# surgical blade, can be purchased from us or from the local market.

12. Q:What’s the MOQ?

A: 50pcs (50pcs/carton)

13. Q: Does the cutter have CE certification?

A: Yes.